Angelcare AC401 Deluxe Bedienerhandbuch PDF herunterladen (Seite 9)

• Movement & Tic. The Movement Sensor is enabled and detects your

baby’s movements. You will also hear a ticking sound from the Nursery

Unit as the Sensor Pad senses your baby’s movement. Your baby’s

sounds, the movement alarm, and the ticking will not be transmitted to

the Parents’ Unit. For this setting, the Movement and “Tic” symbols will

appear (see fig. 16).

Once you have completed your selections, press the Menu button to change

another feature setting or press the Exit button to end programming.

Out-of-Range Indicator (See fig. 17)

The Out-of-Range Indicator will alert you when the Parents’ Unit and the

Nursery Unit are not in communication with each other. This may occur

when the units are too far from each other, if the Parents’ Unit is on when

the Nursery Unit is off, or if the units have lost communication with

each other. The Out-of-Range symbol will flash on the Parents’ Unit and

you will hear two beeps every eight seconds.

To turn this feature on or off:

1. Press the Menu button until the Out-of-Range symbol appears.

2. “ ” or “ ” will appear below. Use the Arrow buttons to make your selection.

3. Press the Select button.

4. Press the Menu button to change another feature setting or press the Exit

button to end programming.

Voice Activation (See fig. 18)

Voice Activation eliminates the background “hum” associated with sound

monitors when there is no significant sound being transmitted from

your baby’s room. It does this by automatically placing both the Nursery

Unit and Parents’ Unit in a “standby” mode. When sound is detected,

the Voice Activation automatically returns both units to an active mode

and immediately transmits the alarm or your baby’s sounds to you.

To use this feature:

1. Press the Menu button until the Voice Activation symbol appears.

2. “ ” or “ ” will appear. Use the Arrow buttons to make your selection.

3. Press the Select button.

4. If you choose to turn Voice Activation on, press the Menu button and then use the

Arrow buttons to choose the level of sensitivity. If you want to hear the slightest sound

in the nursery, adjust the sensitivity to the maximum level (4). If you only want to hear

when the baby cries loudly, adjust the sensitivity to lowest level (1). You may have

to adjust the sensitivity level a couple of times until you get the exact level you want.

NOTE: The movement alarm will be picked up at all levels of sensitivity.

5. Press the Select button when the desired level is displayed.

6. Press the Menu button to change another feature setting or press the Exit button to

end programming.

fig. 16

fig. 17

fig. 18

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

Angelcare AC401 Deluxe Bedienerhandbuch Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Baby-Videomonitore Angelcare AC401 Deluxe